Construction Machinery...

Construction Equipment Teletruks

Reach into Transit-type vans reducing risk of damage.
Reach into ships, ferries and railway carriages from quaysides and platforms.
Remove operators from hazards loading conveyors, furnaces, bailers etc., at reach.
Single side loading, saving up to 50% loading space in congested yards.
Reaching over obstacles in busy storage yards.

Change between a variety of 3000 plus industrial attachments in minutes.
Change from forklift to small loading shovel by fitting a GP shovel - 2 in 1.
111 degrees of carriage rotation for tupping carriage mounted GP shovels - no extra hydraulics required.
2 and 4 wheel drive to cope with the most difficult surfaces.
Negative lift as standard for reaching below ground level.

Particularly beneficial when loading in fully retracted and lowered position. Slimline boom for maximum fork tip visibility.
Cab enclosure is much more robust than on any forklift with a mast. ROPS and FOPS operator enclosure.
There are none of the safety concerns associated with masted forklifts if lift chains fail. Hose burst check valves as standard.
Load moment indicator senses machine stability during load lift.
Excellent visibility of fork tips during loading when fully retracted, also when working inside containers. No mast improves forward visibility which is second to none.

Changezee - Change from shovel to forks in 20 seconds without leaving the cab.
JCB introduced four-wheel drive to industrial counterbalanced fork lift trucks, giving opportunities beyond the capability of ordinary masted machines.
High-lift - Increased maximum lift height to 5150mm.
High-lift - Maximum forward reach up to 3300mm.
Telescopic boom provides the unique ability to load and offload at reach with a compact industrial counterbalanced forklift.

Teletruk can reduce the customer's machine fleet holding
One teletruk can sometimes do the work of one, two or three machines on site.
Teletruk's foward reach eliminates the need for expensive and often heavy 'scissor type' load extenders required by ordinary master fork lifts.
Single side loading saves time, space and money.
Teletruk telescopic boom design eliminates expensive safety checks to lift chains and rollers on ordinary forklifts and the expense of replacing these regular wear-parts particularly when loading abrasive materials, i.e sand, cement and aggregates.

Reach into Transit-type vans reducing risk of damage.
Reach into ships, ferries and railway carriages from quaysides and platforms.
Remove operators from hazards loading conveyors, furnaces, bailers etc., at reach.
Reaching over obstacles in busy storage yards.
Single side loading, saving up to 50% loading space in congested yards.

Change between a variety of 3000 plus industrial attachments in minutes.
Negative lift as standard for reaching below ground level.
Change from forklift to small loading shovel by fitting a GP shovel - 2 in 1.
111 degrees of carriage rotation for tupping carriage mounted GP shovels - no extra hydraulics required.
2 and 4 wheel drive to cope with the most difficult surfaces.

Particularly beneficial when loading in fully retracted and lowered position. Slimline boom for maximum fork tip visibility.
Cab enclosure is much more robust than on any forklift with a mast. ROPS and FOPS operator enclosure.
There are none of the safety concerns associated with masted forklifts if lift chains fail. Hose burst check valves as standard.
Excellent visibility of fork tips during loading when fully retracted, also when working inside containers. No mast improves forward visibility which is second to none.
Load moment indicator senses machine stability during load lift.

Changezee - Change from shovel to forks in 20 seconds without leaving the cab.
JCB introduced four-wheel drive to industrial counterbalanced fork lift trucks, giving opportunities beyond the capability of ordinary masted machines.
High-lift - Increased maximum lift height to 5150mm.
High-lift - Maximum forward reach up to 3300mm.
Telescopic boom provides the unique ability to load and offload at reach with a compact industrial counterbalanced forklift.

Teletruk can reduce the customer's machine fleet holding
One teletruk can sometimes do the work of one, two or three machines on site.
Single side loading saves time, space and money.
Teletruk telescopic boom design eliminates expensive safety checks to lift chains and rollers on ordinary forklifts and the expense of replacing these regular wear-parts particularly when loading abrasive materials, i.e sand, cement and aggregates.
Teletruk's foward reach eliminates the need for expensive and often heavy 'scissor type' load extenders required by ordinary master fork lifts.